跳到主要內容

如何基於Excel中的單元格值自動刪除線？

在Excel中，我們可以應用刪除線來手動刪除不需要的單元格內容，但是，在本文中，我將討論如何基於單元格值自動刪除線。 例如，我想基於列E中的單元格值對行數據應用刪除線，如果單元格值為“ N”，則自動對相關行應用刪除線，如下面的屏幕截圖所示。

doc自動刪除線1

基於條件格式的單元格值自動刪除線

箭頭藍色右氣泡 基於條件格式的單元格值自動刪除線

事實上， 條件格式 Excel中的功能可以幫助您盡快完成此任務，請執行以下操作：

1。 選擇您要應用刪除線的數據范圍，然後單擊 首頁 > 條件格式 > 新規則，請參見屏幕截圖：

doc自動刪除線2

2。 在 新格式規則 對話框，請單擊 使用公式來確定要格式化的單元格 在選項 選擇規則類型 列錶框，然後輸入以下公式： = $ E2 =“ N” 到 格式化此公式為真的值 文本框，請參見屏幕截圖：

注意： 在上面的公式中： E2 和“N”是您要應用刪除線依據的單元格和文本值，請根據需要更改它們。

doc自動刪除線3

3。 然後點擊 格式 按鈕去 單元格格式 對話框，在 字體 選項卡，檢查 刪除線 來自 影響 列錶框，請參見屏幕截圖：

doc自動刪除線4

4。 然後點擊 OK > OK 關閉對話框，現在，當您輸入的值是特定的文本“ N”時，整個行數據將自動應用刪除線，請參見屏幕截圖：

doc自動刪除線5

最佳辦公生產力工具

🤖 Kutools 人工智慧助手：基於以下內容徹底改變數據分析： 智慧執行   |  生成代碼  |  建立自訂公式  |  分析數據並產生圖表  |  呼叫 Kutools 函數...
熱門特色: 尋找、突出顯示或識別重複項   |  刪除空白行   |  合併列或儲存格而不遺失數據   |   沒有公式的回合 ...
超級查詢: 多條件VLookup  |   多值VLookup  |   跨多個工作表的 VLookup   |   模糊查詢 ....
高級下拉列表: 快速建立下拉列表   |  依賴下拉列表   |  多選下拉列表 ....
欄目經理: 新增特定數量的列  |  移動列  |  切換隱藏列的可見性狀態  |  比較範圍和列 ...
特色功能: 網格焦點   |  設計圖   |   大方程式酒吧   |  工作簿和工作表管理器   |  資源庫 （自動文字）   |  日期選擇器   |  合併工作表   |  加密/解密單元格   |  按清單發送電子郵件   |  超級濾鏡   |   特殊過濾器 （過濾粗體/斜體/刪除線...）...
前 15 個工具集:  12 文本 工具 (添加文本, 刪除字符，...）   |   50+ 圖表 類型 (甘特圖，...）   |   40+ 實用 公式 (根據生日計算年齡，...）   |   19 插入 工具 (插入二維碼, 從路徑插入圖片，...）   |   12 轉化 工具 (數字到單詞, 貨幣兌換，...）   |   7 合併與拆分 工具 (高級合併行, 分裂細胞，...）   |   ... 和更多

使用 Kutools for Excel 增強您的 Excel 技能，體驗前所未有的效率。 Kutools for Excel 提供了 300 多種進階功能來提高生產力並節省時間。  點擊此處獲取您最需要的功能...

產品描述

Office選項卡為Office帶來了選項卡式界面，使您的工作更加輕鬆

  • 在Word，Excel，PowerPoint中啟用選項卡式編輯和閱讀，發布者，Access，Visio和Project。
  • 在同一窗口的新選項卡中而不是在新窗口中打開並創建多個文檔。
  • 將您的工作效率提高 50%，每天為您減少數百次鼠標點擊！
Comments (8)
Rated 5 out of 5 · 1 ratings
Annie
Annie
This comment was minimized by the moderator on the site
Hi,
How can I do if I want the row struckthrough if say EITHER B2= Yes OR I2 = 0?
If I just put it as OR($B2="Yes",$I2="0"), it wont strikethrough if both values are met.
Reply
0
0
Rated 5 out of 5
Allanah
Allanah
This comment was minimized by the moderator on the site
Is it possible to use this formula with a numeric value of zero? I cannot for the life of me get it to work that way but it will work with letters.
Reply
0
0
MandyZhou
MandyZhou     Allanah
This comment was minimized by the moderator on the site
Hello friend,

Glad to help. Yes, you can use this formula =$E1= 0 with a numeric value of zero. Please see the screenshot, you can input formula =$E1= 0 into the Format values where this formula is true text box. Please note the first row of the data is header.
https://www.extendoffice.com/images/stories/comments/comment-zmt/strikethrough-value.png

Sincerely,
Mandy
Reply
Report
0
0
PIC Bouygues
PIC Bouygues
This comment was minimized by the moderator on the site
Merci beaucoup :) <3 
Reply
0
0
Stone
Stone
This comment was minimized by the moderator on the site
I regularly wind up utilizing the strikethrough highlight in both Word and Excel to stamp things as finished. This component is genuinely clear in Word, as a strikethrough symbol shows up conspicuously on the Home tab in Word 2007 and later. Then again, in Excel this component doesn't have its own particular symbol, yet it has a console alternate route, Ctrl-5. However there's no worked in essay writing route for strikethrough in Word.
Reply
Report
0
0
Linda Harvey
Linda Harvey
This comment was minimized by the moderator on the site
Hello everyone, I just have to say that this site is just amazing!
Much creative and extremely curricular website I have ever found while searching essay writing service on the Internet.
I am very satisfied with their work and inventory, everything looked very well and kept. I appreciate your work, keep up a great job.
Reply
0
0
Alex
Alex
This comment was minimized by the moderator on the site
This was a great help to me
Reply
0
0
Sarah B.
Sarah B.
This comment was minimized by the moderator on the site
Using the instructions from this page (Auto strikethrough based on cell value with Conditional Formatting) I am trying to add the proper formula to a spreadsheet with the cell value being a check mark (instead of N like the example). Ultimately, what I am trying to do is this: When I double click column A1, it will automatically add a check mark in that cell. In addition to the check mark, it will perform auto-strikethrough on cells B1 and C1. Is it possible to accomplish this? I had no problem entering a rule to add a check mark to a cell by double clicking it. And I had no problem adding the conditional formatting in order to auto strikethrough text. What I cannot seem to figure out is how to combine the 2 efforts. I do not like the idea of Check boxes and have tried that route already.
Reply
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations